Great Equipment & Exceptional Service

• Rock drill: hydraulic rock drill is designed with special structural process on the basis of the tunneling construction process in China, being characterized by super-strong deflection resistance capacity, high drilling speed and low drilling tool exhaustion, capable of effectively improving the use performance of the tunnel side hole operation.

• Booster: lightweight high-strength alloy beam, high-strength, flexural resistant, torque resistant and fatigue performance, longer service life.

• Chassis: high-efficiency low-discharge engine, articulated frame, full-driven adaptive walk system, good vehicle manoeuvrability, and good trafficability.

• Drill arm: the proprietary technology is used for full-sided parallel holding of the drill arm, with accurate positioning; the drill arm is designed with the interlocked telescopic structure, capable of effectively enlarging the rock drilling range.

• Drilling system: designed with the automatic rod jamming, idle drilling prevention and automatic rod retrieval functions, capable of effectively improving the drilling efficiency.

Overview

Operation performance parameterUnitTZ1
Maximum    operation coverage area32
Maximum    operation heightmm6350
Maximum    operation widthmm6110
Drill    arm extension lengthmm1250
Drill    arm lifting angle°65/-30
Drill    arm swing angle°±35
Propeller    overturning angle°360
Propeller    compensation lengthmm1250
Maximum    pushing forcekN20
Borehole    depthmm3400
Rock    drill impact powerkW17/20
Rock    drill impact frequencyHz60/70
Rock    drill turning torqueN.m325/762
Borehole    diametermm45/70
Work    service platformNo
Cabin    roof lifting heightmm700
Lift of    the flushing pumpm127
Flow of    flushing waterL/min100
Water    inlet pipe diameter/length“/m1.5/60
Pressure    of air lubricating systembar3/8
Maximum    air lubricating amountL/min300
Electrical    system parameters
Total    installed powerkW63
External    power supplyV/Hz380/50
External    cable lengthm50
Quantity    of main pump motor1
Power    of main pump motorkW55
Rotating    speed of main pump motorr/min1470
Power    of pump motorkW3
Transformer    powerkW4
Main    work lightingkW0.4×2
Auxiliary    work lightingkW0.15×2
Drive    performance parameters
Maximum    drive speedkm/h13
Drive    means4×4
Maximum    gradability%25
Minimum    turning radiusm3.2
Turning    modeArticulated steering
Turning    angle°±37
Service    brakeHydraulic two-circuit, wet-type
Parking    brakeWet-type
Minimum    ground clearancemm230
Approach    angle/departure angle°15/15
Engine
Engine    modelSDEC SC4H80G2A
Power/rotating    speedkW/r/min53/2300
DischargeNon-road, Guo II
Mass    parameters
Vehicle    masskg12000
Size    parameters
Outline    dimensions (L*W*H)mm12370×2100×2300
<< Equipment Categories