NEW EQUIPMENT

AERIAL WORK PLATFORMS

Home      ▸      New Equipment     ▸      Aerial Work Platforms     ▸      Straight Boom     ▸     GTBZ26S

GTBZ26S Straight Boom

QUICK SPECIFICATIONS

Specifications are subject to change. Numbers may be rounded.

OVERALL LENGTH 39.7 ft 12,100 mm
OVERALL WIDTH 8.2 ft 2,490 mm
OVERALL HEIGHT 10 ft 3,050 mm
WHEEL BASE 9.8 ft 3,000 mm
TOTAL WEIGHT 36,595 lbs 16,599 kg
SIZE (L x W x H) 476" x 98" x 120" -
DESCRIPTION
INTRODUCTION

The straight boom aerial work platform at the elevation of 26 meters developed by XCMG is self-equipped with a small-sized fly jib, thus having a certain capacity in obstacle crossing, and being stretchable to any inaccessible position; the double-load control system may automatically adjust the operating radius as the loads may be, which will satisfy the different demands of the users on different loads. It is an ideal choice for users engaged in building construction, bridges, steel structures and installation & construction both inside and outside the venue.

FEATURES
ABILITY IN FAST ACCESS TO THE CONSTRUCTION AREA

The boom was driven by a single-cylinder and the synchronously amplitude-varying and lifted stand column enhance the operating speed, and realize the fast access to the construction area, which will improve the construction efficiency.

BETTER ADAPTABILITY TO POOR CONSTRUCTION ENVIRONMENTS

The application of a lubrication-free shaft sleeve and slider relieves the friction between each hinge point for connection and inter-arm slider, thus resulting in better adaptability to welding and dusty environment.

ADVANCED POWER SYSTEM INTEGRATION CONTROL

The electronic-controlled engine is adopted as the dynamical system, oil pressure, water temperature, rotating speed, sensor, etc. are integrated by the engine and controlled through ECU, which is safe and reliable. Meanwhile, there is a fault diagnosis interface as supporting for convenience of fault diagnosis and maintenance.

SPECIFICATIONS
Item Unit Parameter
a Overall Length mm 12100
b Overall Width mm 2490
c Overall Height mm 3050
d Wheel Base mm 3000
Maximum Working Height m 27.9
Maximum Platform Height m 26.2
Maximum Working Range m 23.2
Maximum Load Capacity kg 340
Boom Luffing Range  ° -5~+75
Crank Arm Luffing Range  ° -65~+70
Rotation Angle of Rotating Platform ° 360
Maximum Tail Wagging mm 1400
Platform Size mm 2.4×0.9/1.8×0.8
Rotation Angle of Platform  ° 180
Total Weight kg 16600
Maximum Travel Speed km/h 6.1
Minimum Turning Radius m 6.7
Minimum Ground Clearance mm 320
Maximum Grade Ability % 45
Tire Specification 385/65-22.5
Engine Model Foton CumminsQSF2.8-71HP
Rated Power of Engine kW/(r/min) 53/(2200)